Dimethyltryptamine is a fun serotonin receptor agonist. The chemical name of DMT is N,N-Dimethyl-1H-indole-3-ethanamine.
 General Information
DMT is a very powerful hallucinogen that has been utilized by man for a long time. It is produced naturally in the body, and when administered in large doses it produces a "breakthrough" effect in which the user will become almost completely separated from reality as we know it (users sometimes refer to the DMT reality as "hyperspace"). The breakthrough from smoking is very short lived, about 8 minutes tops, though it can feel like a much longer period of time. The effects last about 30 minutes to an hour afterwords, with some powerful visuals and mood lift. Smoking around 50 mg will normally produce breakthrough effects and is the most common route of administration. It is not orally active without a MAOI (Monoamine oxidase inhibitor). When extracted DMT is combined with a MAOI it is generally called Pharmahuasca. When a plant mixture containing DMT and other alkaloids is combined with a MAOI then it is generally called Ayahuasca.
None of the basic NIDA-5 drug tests or any extended drug test will show a result for DMT. DMT is naturally formed in the body and has been found in abnormal levels in the body fluids of persons suffering from schizophrenia. DMT is almost never sold through dealers outside of specific circles and is not particularly commonly used. It is, however, easily extracted from common plant materials and has been used in various forms for thousands of years.
 A Simple Extraction Technique
 Things needed:
- 900ml jar
- 200ml jar
- 100g Mimosa hostilis root bark
- 150ml Naptha
- 100g Lye (sodium hydroxide)
- Distilled water
- Turkey baster
- Aquarium heater
- safety goggles
- safety gloves
 How it’s done:
 Step 1 - SAFETY
Safety goggles and safety gloves should be worn while handling lye.
Long sleeve tops and trousers should also be worn for extra protection.
Lye reacts with water and becomes extremely hot, so if any comes in contact with skin seek medical advice.
 Step 2
The distilled water and lye should be mixed together until the solution becomes clear.
(always add the lye to the water bit by bit and not the other way round, as already explained the lye and water mixed together will become very hot and if the water is added to the lye it could become extremely hot and smash the jar and come into contact with skin)
Once the solution is clear the mimosa hostilis root bark is then added and submerged in the solution.
Then the lid needs to be screwed on to the jar and left at room temperature for 24 hours.
 Step 3
After the 24 hours, the aquarium heater should be placed into the water filled tub and wait until heated.
The naptha should then be added into the jar, the lid is then placed back on and the jar needs to be shaken.
The jar then needs to be placed into the tub of water for 24 hours, leaving the lid of the jar out of water.Shake the jar every so often through out the 24 hours.
The naptha slowly absorbs the dmt from the root bark.
 Step 4
A turkey baster is then used to collect the naptha and put in to the 200ml jar.
The naptha should be completely clear, with a tint of yellow.
No brown liquid should be tolerated as this affects the dmt.
 Step 5
The jar of naptha should be then placed in to the freezer for 24 hours.
The jar then needs to be taken out of the freezer and left for about half an hour so that the naptha becomes clear.
The naptha should be then be slowly poured back into the jar filled with the rootbark and left in the aquarium heater.
 Step 6
There should only be crystals with a tint of yellow-white, left in the 200ml jar.
The jar needs to be left for 24 hours as it needs to dry out.
Placing the jar in front of a fan will speed things up. Once the dmt is then dried, it can be then scraped out with a clean scalpel or knife.
 Smoking Technique:
Although the internet is full of various smoking and vaporizing techniques that may or may not be more effective than others I’ve always found the simplest way to successfully smoke DMT is to put it into a normal water filtered bong with a small mixture of weed or other filler to absorb the DMT as it melts and light the bowl as usual. Take big pulls and hold them in for as long as you possibly can, if you are worried about the harshness of the smoke putting ice into the bong water helps drastically.